RJ-901C/RJ-900C Maintenance Manual 4 Parts Replacement
4-7
6. Remove the R side cover inner screw (tapping screw M4 × 12, P tight binding black: 2pcs).
7. Remove the R side cover rear screw (tapping screw M4
× 12, S tight cup: 2pcs).
8. Return the pressure lever forward and remove the R side cover to the upper right direction.
9. Replace the parts inside the product.
10. To reassemble the unit, reverse the removal procedure.
No. Part name
1 R side cover
2 R side cover inner screw
No. Part name
1 R side cover
2 R side cover rear screw
2
1
1
2
To Next Page
Loading...
