EasyManuals Logo
Home>Xerox>All in One Printer>Phaser 6128MFP

Xerox Phaser 6128MFP User Manual

Xerox Phaser 6128MFP
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Phaser® 6128MFP Multifunction Printer
10
The power cord is attached to the printer as a plug-in device at the back of the printer. If it
is necessary to disconnect all electrical power from the printer, disconnect the power cord
from the electrical outlet.
Warning: Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are specifically instructed to do so. Power should be OFF
when performing these installations. Except for user-installable options, there are no parts
that you can maintain or service behind these covers.
Note: Leave the printer on for optimum performance; it does not pose a safety hazard. If
however the printer will not be used over an extended period of time, it should be turned
off and unplugged.
The following are hazards to your safety:
The power cord is damaged or frayed.
Liquid is spilled into the printer.
The printer is exposed to water.
If any of these conditions occur, do the following:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative.
Caution: To reduce the risk of fire, use only No. 26 American Wire Gauge or larger
telecommunication line cord.
Laser Safety
With specific regard to lasers, this printer complies with laser product performance
standards set by governmental, national, and international agencies and is certified as a
Class 1 Laser Product. The printer does not emit hazardous light because the beam is
totally enclosed during all modes of customer operation and maintenance.
Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance and could create a hazardous condition.
Do not attempt to open, reuse, or burn any consumables or routine maintenance items.
For information on Xerox supplies recycling programs, go to www.xerox.com/gwa
.
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established
environmental standards.Your attention to the following safety guidelines helps to ensure
the continued, safe operation of your printer.

Table of Contents

Other manuals for Xerox Phaser 6128MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6128MFP and is the answer not in the manual?

Xerox Phaser 6128MFP Specifications

General IconGeneral
Print technologyLaser
Maximum resolution600 x 600 DPI
Economical printingYes
Time to first page (black, normal)14 s
Time to first page (color, normal)17 s
Print speed (black, normal quality, A4/US Letter)16 ppm
Print speed (color, normal quality, A4/US Letter)12 ppm
Scanner typeFlatbed scanner
Image formats supportedJPG, TIF
Copier resize- %
Time to first copy (black, normal)18 s
Copy speed (black, normal quality, A4)16 cpm
Copy speed (color, normal quality, A4)12 cpm
FaxingMono faxing
Fax speed dialing (max numbers)200
Total input capacity250 sheets
Total output capacity150 sheets
DisplayLCD
Market positioningBusiness
Internal memory384 MB
Card reader integratedNo
Sound pressure level (copying)52.2 dB
Sound pressure level (printing)14.9 dB
Maximum print size216 x 297 mm
Paper tray media typesBond paper, Card stock, Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)A4, A5
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 216 g/m²
Power supply typeAC
Dimensions (WxDxH)425 x 507 x 585 mm
Power requirements120 V, 50/60 Hz
Networking featuresFast Ethernet
All-in-one functionsCopy, Fax, Scan
Standard media sizes76.2 x 127 mm - 215.6 x 355.6 mm
Color all-in-one functionscopy, print, scan
Compatible operating systemsWindows 2000+ Mac OS X v10.3 - 10.5 Red Hat Enterprise Linux 5 Desktop SUSE Linux Desktop 10+
Dimensions (W x D x H) (imperial)16.7 x 20 x 23 \
Acoustic power emissions (active, print, copy or scan)62.2/30.3 dB
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Power consumption (standby)18.4 W
Power consumption (average operating)360 W
Sustainability certificatesENERGY STAR
CertificationEEC, FCC
Maximum duty cycle40000 pages per month
Recommended duty cycle3000 pages per month
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Non-operating relative humidity (non-condensing)10 - 85 %

Related product manuals