Printing Custom Size
Phaser® 6128MFP Multifunction Printer
63
7. If necessary, repeat steps 4 to 6 to define another custom size.
8. Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using the PCL driver.
Using the PCL Driver
The procedure to print on custom size paper using the PCL print driver is as follows:
Note: The way to display the printer Properties dialog box differs according to the
application software. Refer to the manual of your respective application software.
1. From the File menu, select Print.
2. Select this printer as the printer to be used and click Preferences.
3. Select the Paper/Output tab.
4. Select the appropriate paper tray from Paper Tray.
5. Select the appropriate paper type from Paper Type.
6. From Paper Size, select the size of the original document.
7. Click the Layout tab.
8. The Fit to New Paper Size defaults to Same As Paper Size.
9. Click OK.
10. Click Print in the Print dialog box to start printing.
To Next Page
Loading...
