Fax Regulations
Phaser® 6128MFP Multifunction Printer
170
The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalent Numbers of all of the devices
does not exceed 5. For the Canadian REN value, please see the label on the equipment.
European Union
Radio Equipment & Telecommunications Terminal Equipment Directive
This Xerox product has been self-certified by Xerox for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance with
Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries.
In the event of a problem you should contact your authorized local dealer in the first
instance. This product has been tested to and is compliant with TBR21, a specification for
terminal equipment for use on analogue-switched telephone networks in the European
Economic Area. This product provides an user-adjustable setting of the country code. Refer
to the customer documentation for this procedure. Country codes should be set prior to
connecting this product to the network.
Note: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling,
it is recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and
faster call setup. Modification of this product, connection to external control software or to
external control apparatus not authorized by Xerox, will invalidate its certification.
South African Statement
This modem must be used in conjunction with an approved surge protection device.
New Zealand Telecom Warning Notice
1. The grant of a Telepermit for any item of terminal equipment indicates only that
Telecom has accepted that the item complies with minimum conditions for connection
to its network. It indicates no endorsement of the product by Telecom, nor does it
provide any sort of warranty. Above all, it provides no assurance that any item will work
correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom’s
network services.
The equipment may not be capable of correct operation at the higher data speeds
designated. 33.6 kbps and 56 kbps connections are likely to be restricted to lower bit
rates when connected to some PSTN implementations. Telecom will accept no
responsibility should difficulties arise in such circumstances.
2. Immediately disconnect this equipment should it become physically damaged, and
arrange for its disposal or repair.
3. This modem shall not be used in any manner which could constitute a nuisance to
other Telecom customers.
To Next Page
Loading...
