Xerox Phaser 6128MFP - Fax Configuration

Changing the Default Fax Job Settings
Phaser® 6128MFP Multifunction Printer
99
Changing the Default Fax Job Settings
To change the default fax settings:
1. On the printer control panel, press the System button.
2. Select Default Settings, and then press the OK button.
3. Select Fax Defaults, and then press the OK button.
4. Press the Up Arrow or Down Arrow button to select the setting you want to change.
5. Change the settings, and when finished press the Exit button.
Fax Configuration
To access settings for configuring the printer for faxing:
1. On the printer control panel, press the System button.
2. Select Admin Menu, and press the OK button.
3. Select Fax Settings, and press the OK button.
4. Edit the fax settings as desired.
For information on the Fax Settings menu items, see Fax Settings on page 116.