Cleaning the Printer
Phaser® 6128MFP Multifunction Printer
155
Cleaning the Interior
After clearing paper jams or replacing the imaging unit, inspect the inside of the printer
before closing the printer covers.
Warning: Never touch a labeled area found on or near the heat roller in the fuser. You can
get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by
yourself to avoid injuries or burns. Switch off the printer immediately. Refer to the Xerox
Support website, www.xerox.com/office/6128MFPsupport
.
• Remove any remaining pieces of paper.
• Remove any dust or stains with a dry clean cloth.
To Next Page
Loading...
