2. Move the width guides to the right edge of the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. The
procedure separates any sheets that are stuck together and reduces the possibility of paper jams.
WWaarrnniinngg:: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
4. Load the paper in the Bypass tray. Long-edge feed is the recommended orientation for A5 (148 x 210 mm, 5.8
x 8.3 in.) paper.
WWaarrnniinngg:: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide 205
Paper and Media
To Next Page
Loading...
