2. Ensure that the paper guides are set in the correct position for the size of labels you are loading.
3. Remove any paper that is a different size or type.
4. To move out the length or width paper guide, release the guide lock, then slide out the length or width paper
guide.
5. Load the labels in any of the trays:
a. Load the labels in the Standard Trays 1–4 and adjust the length and width paper guides to fit the labels.
For short-edge feed, insert labels face down with the bottom edge toward the front of the tray.
WWaarrnniinngg:: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide 213
Paper and Media
To Next Page
Loading...
