4. Unpack the new black imaging unit, then to redistribute the toner, shake it three times.
CCaauuttiioonn:: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
WWaarrnniinngg:: Do not touch the shiny photoconductor drum under the imaging unit. Doing so may affect the
quality of future print jobs.
5. Insert the new imaging unit straight into the printer.
226 Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
