Physically Connecting the Printer
1. Connect the power cord to the printer, then plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly-configured network port.
3. If your printer has fax installed, connect it to a correctly-configured telephone line.
4. If your printer has fax installed and is intended to send or receive faxes, connect it to a telephone
that is configured for fax.
5. Power on the printer.
10
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Initial Setup
To Next Page
Loading...
