SNTP
Simple Network Time Protocol (SNTP) synchronizes the internal clocks of computers over a network
connection.
To configure SNTP:
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Protocols area, click SNTP.
3. For Time Server Synchronization, click the toggle button to enable.
4. Click OK.
5. For Time Server Address, type the IP address or host name for the time server.
6. For Time Synchronization Interval, type the synchronization interval in hours.
7. Click OK.
Note: For the new settings to take effect, restart your printer.
64
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Network Connectivity
To Next Page
Loading...
