Xerox VersaLink Series User Manual

IPP
Internet Printing Protocol (IPP) is a standard network protocol that allows you to print and manage
jobs remotely. When IPP is configured, IPP authentication allows users to authenticate their identities
using IPP through HTTP authentication methods. An IPP client can pass user credentials to the printer
to use for authentication.
To configure IPP:
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. For Protocols, click IPP.
3. For Port, enable the toggle button.
4. For PJL, enable the toggle button.
5. For print mode, click Print Mode, then select an option. The default value is Auto.
6. For Alternate Port (IPP), enable the toggle button.
7. If you enabled Alternate Port (IPP), for Alternate Port Number (IPP), type a port number in the
field, or use the default port number of 80.
8. For Alternate Port (IPPS), enable the toggle button.
9. If you enabled Alternate Port (IPPS), for Alternate Port Number (IPPS), type a port number in the
field, or use the default port number of 443.
10. For TBCP Filter, enable the toggle button.
11. For Password Required, enable the toggle button.
12. For Connection Timeout, enable the toggle button.
13. If you enabled Connection Timeout, for Timeout, type the number of seconds in the field.
14. Click OK.
Note: For the new settings to take effect, restart your printer.
50
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Network Connectivity

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English