Scanning to USB
You can insert a USB Flash Drive into the printer, scan a document, and store the scanned file on the
USB drive.
Note: The USB port does not support scanning directly to a PC.
Before you begin, enable USB ports. For details, refer to USB.
To enable scanning to USB:
1. In the Embedded Web Server, log in as administrator, then click Apps.
2. In the Installed Apps area, click USB.
3. For Display on Device, click Show.
4. To enable Scan To USB, enable the Scan To toggle button.
5. Configure the settings as needed for the following categories:
• Defaults
• General Settings and Policies
• Scan To Apps General Settings
• Presets
6. For the new settings to take effect, restart your printer.
128
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Scanning
To Next Page
Loading...
Need help?
General