Xerox VersaLink Series User Manual

LPD
The Line Printer Daemon (LPD) protocol provides printer spooling and network print server
functionality for UNIX-based systems, such as HP-UX, Linux, and Macintosh
®
. Windows
®
uses LPD for
LPR print protocol.
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Protocols area, click LPD.
3. For Port, enable the toggle button.
4. For Port Number, type a value.
5. For PJL, enable the toggle button.
6. Click Print Mode, then select an option.
7. For TBCP Filter, enable the toggle button.
8. For Timeout, type the number of seconds that the printer waits when a job is interrupted and data
stops arriving.
9. For Maximum Number of Sessions, type the maximum number of simultaneous jobs that the
printer can accept.
10. Click Parameter Text String Encoding, then select an option.
11. To use TCP-MSS, enable the toggle button, then for IPv4 Subnet 1, IPv4 Subnet 2, and IPv4
Subnet 3, type the IP addresses and port numbers.
12. Click OK.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
55
Network Connectivity

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English