Setting System Timeouts
1. In the Embedded Web Server, log in as administrator, then click System→Timeouts.
2. In the Reset Device Control Panel area, for System Timeout, type the number of seconds that the
printer remains idle before the control panel goes into Standby mode.
3. In the Reset Device Website area, for Device Website Timeout, type the number of minutes that
the printer remains idle before the Embedded Web Server goes into Standby mode.
4. Click OK.
96
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Security
To Next Page
Loading...
