Configuring the Scan To App
The Scan To app allows you to associate scan destinations with address book contacts.
To configure the Scan To app:
1. In the Embedded Web Server, log in as administrator, then click Apps.
2. In the Installed Apps area, click Scan To.
3. For Display on Device, click Show.
4. Configure the settings as needed for the following areas:
• Defaults
• General Settings and Policies
• Scan To Apps General Settings
• Presets
5. When finished, close the configuration window.
126
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Scanning
To Next Page
Loading...
