Xerox VersaLink Series User Manual

5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
To perform a manual color registration adjustment:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Color Registration - Manual.
3. To print a sample page, touch Print Sample. Examine the sample page.
4. Enter any adjustments into the control panel, then touch Adjust.
Print another sample page to verify the adjustments.
1. Make additional adjustments until the pages print as needed.
2. To exit the menu, touch X.
3. To return to the Home screen, press the Home button.
CCoonnffiigguurriinngg tthhee SSccaann CCoolloorr CCoonnssiisstteennccyy aatt tthhee
CCoonnttrrooll PPaanneell
Use the Scan Color Consistency procedure to adjust scanned colors that appear incorrect, or for
composite grays that look neutral. This procedure prints a Calibration Chart that you load into the
automatic document feeder. The printer scans that page and uses the scanned values to complete
the adjustments.
To perform the Scan Color Consistency procedure:
1. At the printer control panel, press the Home button.
2. Touch Device→Support→Scan Color Consistency.
3. To select the desired procedure, touch Calibration Type, then select a procedure.
• To perform the Scan Color Consistency procedure, touch Print Calibration Chart. Follow the
onscreen instructions.
• To restore the color scan settings to the previous settings, touch Restore Previous Settings.
Follow the onscreen instructions.
• To reset the color scan settings to factory-default values, touch Reset to Factory Defaults.
Follow the onscreen instructions.
4. When finished, touch Close.
5. To exit the menu, touch the Back arrow.
6. When finished, to return to the Home screen, press the Home button.
CCoonnffiigguurriinngg tthhee IImmaaggee PPoossiittiioonn aatt tthhee CCoonnttrrooll PPaanneell
You can use Adjust Paper Registration to adjust the placement of the printed image on the page. The
adjustment allows you to place the top, bottom, left, and right margins exactly where you want. You
can specify the image position on both the front and back sides of the paper, for each installed paper
tray.
176
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Administrator Tools

Xerox VersaLink Series Specifications

General

Brand	Xerox
Model	VersaLink Series
Category	Printer
Language	English