3. Touch Device→Support→Image Position.
4. To adjust registration, select the source paper tray.
a. Touch Paper Supply.
b. Touch the required tray.
5. Using the chart printed in Verifying Paper Registration, select the side for registration.
• For adjusting Side 1, touch Adjusted Side, then touch Side 1.
• For adjusting Side 2, touch Adjusted Side, then touch Side 2.
6. To adjust the registration, touch Lead/Side Registration.
• To adjust the side-to-side registration, for Side Registration, touch the Plus icon (+) or the
Minus icon (–).
• To adjust the top-to-bottom registration, for Lead Registration, touch the Plus icon (+) or the
Minus icon (–).
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
•
For Lead Registration, a positive value shifts the image down the page.
•
For Side Registration, a positive value shifts the image to the left.
7. To save your settings, touch OK.
8. As needed, repeat steps 4 through 6 to enter more values.
9. Print another sample page, then repeat the process until you complete the registration
corrections.
10. To return to the Home screen, press the Home button.
178
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Administrator Tools
To Next Page
Loading...
