Xerox VersaLink Series - Page 182

CCoonnffiigguurriinngg TTeemmppllaattee PPooooll RReeppoossiittoorryy SSeettttiinnggss
If you use a scanning management application, such as SMARTsend or ScanFlowStore, provide
information about the server that hosts the templates on this page.
1. In the Embedded Web Server, click Apps.
2. Click EIP Settings.
3. In the Scan Template Settings area, select Other Settings.
4. In the Template Pool area, click Edit.
5. Click Server Type, then select the protocol for the server where the Template Pool is located.
6. Enter the configuration information, then click OK.
7. To enable automatic refresh of templates, enable the Automatic Refresh toggle button.
8. For Daily Refresh Time, type the time that templates update.
9. To update the template list immediately, click Refresh Template List Now.
10. Click Print Confirmation Sheet, then select the conditions for when you want a confirmation
sheet to print.
11. To include user names in the job log, enable the User Name in the Job Log toggle button.
182
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
Customization and Expansion