IImmppoorrttiinngg aa SSeeccuurriittyy CCeerrttiiffiiccaatteess ffoorr AAiirrPPrriinntt
®®
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Mobile Printing area, click AirPrint
®
. Ensure that the Enable toggle button is selected.
3. For Security Certificates area, click Edit.
4. Click Device Certificates, then select a category of certificates.
5. Select one or more certificates to import, then click Import. The Import Certificate window
appears.
Note: The Import function is accessible only if HTTPS SSL is enabled. For details, refer to HTTP.
1. Click Select, then navigate to the certificate that you want to import. Click Open.
2. For Password and Retype Password, type the password for the new certificate.
3. Click Import.
4. In the lower part of the Security Certificates window, click to select a certificate from the list. If
you want to select all the certificates in the list, click Select/Clear All.
5. Click Close.
6. Click OK.
CCoonnffiigguurriinngg AAiirrPPrriinntt
®®
ffoorr SSooffttwwaarree UUppddaatteess
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. For Mobile Printing, click AirPrint
®
.
3. To enable AirPrint
®
, for Enable, click the toggle button.
4. For Software Update, click Edit and Check Now.
Note: The Edit and Check Now button takes you to the Software Update feature in the Embedded
Web Server. For details, refer to Updating the Printer Software.
CChheecckkiinngg PPrriinntteerr SSuupppplliieess iinn AAiirrPPrriinntt
®®
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Mobile Printing area, click AirPrint
®
.
3. To enable AirPrint
®
, for Enable, click the toggle button.
4. In the Supplies area, click Check Status.
Note: The Check Status button takes you to the Supplies page in the Embedded Web Server. For
details, refer to Configuring Low Supply Warning.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
37
Network Connectivity