1. In the Outgoing SMTP Authentication area:
• To enable SMTP authentication, click SMTP Authentication, then from the menu, select SMTP
AUTH.
• If you enabled SMTP authentication, then for SMTP AUTH User Name, SMTP AUTH Password,
and Retype Password, type the login credentials.
• If you enabled SMTP authentication, click Validation Type, then select an option.
– On Device: The printer uses the values for SMTP AUTH User Name and SMTP AUTH
Password to submit to the SMTP server.
– On Network: The printer uses the network login credentials for the user to send an email to
the SMTP server.
• If you selected On Network, click If Unsuccessful, then select an option.
– Cancel Sending: This option cancels the email submission.
– Retry on Device: This option makes a second attempt to send the email using the On
Device authentication.
2. Click OK.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
59
Network Connectivity
To Next Page
Loading...
