Printing using Windows
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
100
8. Select the components to be
installed and select Next. You
can change the desired
installation folder by selecting
Browse.
9. After the installation is finished,
a window asking you to print a
test page appears. If you choose
to print a test page, select the
checkbox and select Next.
Otherwise, just select Next and
skip to step10.
10. If the test page prints out
correctly, select Yes. If not, select
No to reprint it.
11. Select Finish.
Wireless Printer (WorkCentre 3325DNI)
When you connect your printer to a network, you must first configure the TCP/IP settings for the
printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software
on each computer on the network.
1. Make sure that the printer is connected to your computer with a usb cable and powered on. For
details about connecting to the network, refer to the System Administrator Guide.
To Next Page
Loading...
