Xerox WorkCentre 3315DN User Manual

Copy Procedure
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
32
Copy Procedure
This section describes the basic procedure for making copies:
• Loading Documents on page 32
• Select the Features on page 33
• Enter the Quantity on page 34
• Start the Job on page 34
• Check the Job Status on page 35
• Stop the Copy Job on page 35
If an authentication feature is enabled, you may need an account before using the machine. To get an
account, or for more information, contact your System Administrator.
Note: Some options may be unavailable depending on your machine configuration.
Loading Documents
Documents can be loaded either into the automatic document feeder or onto the document glass.
Automatic Document Feeder
The automatic document feeder can hold a maximum of 50 originals of 20 lb (80 g/m²) thickness.
1. Load documents to be scanned face up in the input tray
of the automatic document feeder with the top of the
document to the left of the tray.
2. Move the document guide to just touch both sides of the
document.

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English