Xerox WorkCentre 3315DN User Manual

Powering on the Machine
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
11
Powering on the Machine
The On/Off switch and the power cable socket are at the rear of the machine.
1. Connect the
AC Power Cord to the machine and a
power outlet. The power cord must be plugged into a
grounded power socket.
2. Press the
ON/OFF switch to the ON (I) position.
Power Save
This machine contains advanced energy conservation
technology that reduces power consumption when it is not in
active use.
• When the printer does not receive data for an extended
period of time, the Power Save mode becomes active and power consumption is automatically
lowered.
•Press the Power Save button to select the Power Save mode immediately.
To restore the machine to a normal state, press any button.
Note: When in Power Save mode, the machine will not recognize when a USB Memory Device is
inserted into the USB port. Press any button to restore the machine to a normal state and reinsert
the USB Memory Device into the port.
Powering off the Machine
There are two ways to switch the machine off:
•Press the ON/OFF switch to the (O) position.
•Press the Power Save button and select Power Down and then OK.
1
2
1
2

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English