Xerox WorkCentre 3315DN - Page 149

Setting Paper Size and Type
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
149
2. Press the up/down arrows to highlight System Setup and press OK. If necessary, enter the
Administrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 for
instructions.
3. Press the up/down arrows to highlight Paper Setup and press OK.
4. Press the up/down arrows to highlight Paper Source and press OK.
5. Press the up/down arrows to highlight Copy Tray or Fax Tray and press OK.
6. Press the up/down arrows to select the paper tray you want.
7. Press OK to save the selection.
8. Press Stop to return to Ready mode.