Xerox WorkCentre M20i - Page 35

Xerox WorkCentre M20i System Administration Guide Page 2-9
Basic Network Installation
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see the User Guide for printing reports).
6
¾ Press or until TCP/IP is
displayed and press [Enter].
You can use DHCP or BOOTP
to automatically configure TCP/
IP on the machine.
Config Network
[TCP/IP]
7
¾ Press or until the
required setting method is
displayed and press [Enter].
TCP/IP
[DHCP]
8