Xerox WorkCentre M20i - Page 84

Page 6-6 Xerox WorkCentre M20i System Administration Guide
Advanced TCP/IP Setup
5
¾ Press or until Configure
Network is displayed and press
[Enter].
Network Setup
[Config. Network]
6
¾ Press or until TCP/IP is
displayed and press [Enter].
Config Network
[TCP/IP]
7
¾ Press or until Manual is
displayed and press [Enter].
TCP/IP
[Manual]
8
¾ Press or until Raw
Printing is displayed and press
[Enter].
Manual
[Raw Printing]