Xerox WorkCentre M20i - Page 87

Xerox WorkCentre M20i System Administration Guide Page 6-9
Advanced TCP/IP Setup
6
¾ Press or until TCP/IP is
displayed and press [Enter].
Config Network
[TCP/IP]
7
¾ Press or until Manual is
displayed and press [Enter].
TCP/IP
[Manual]
8
¾ Press or until HTTP is
displayed and press [Enter].
Manual
[HTTP]
9
¾ To enable or disable HTTP, press
or until the desired
setting, [Enable] or [Disable] is
displayed and press [Enter].
HTTP
[Enable]