EasyManuals Logo

Xerox WORKCENTRE PE 220 User Manual

Xerox WORKCENTRE PE 220
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Status Indicator RAPs
2-22 11/05 Workcentre PE 220
15F Defective FAX RECEIVE (2)
Description
Received data is corrupted.
15G Defective FAX RECEIVE (3)
Description
The phone is ringing continuously, but the machine does not answer the call.
15H Defective FAX RECEIVE (4)
Description
Received data is reduced by more than 50% in the printing.
Check and Cause Solution
1. Check for NOISE on the line. Press Manual
Dial and listen.
1. If you can hear a noisy line when using
Manual Dial, replace or repair the telephone
line.
2. Ask sender to send to another fax machine
(if possible connected to the same wall
socket)
2. Replace LIU or main PBA , PL 1.
Check and Cause Solution
1. Check that the RECEIVE Mode is set to
FAX MODE.
1. If the fault persists even when the
RECEIVE Mode is changed to FAX MODE
then replace the LIU and the Main PBA, PL 1.
Check and Cause Solution
Check the FAX status of the forwarding side. This is a problem with the sending fax
machine. Inform the customer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WORKCENTRE PE 220 and is the answer not in the manual?

Xerox WORKCENTRE PE 220 Specifications

General IconGeneral
BrandXerox
ModelWORKCENTRE PE 220
CategoryAll in One Printer
LanguageEnglish

Related product manuals