31
(2) Set the parameter
①For example, the parameter PC-00 (jog frequency) is changed from 5.00Hz to 8.05Hz.
In the three-level menu, if the parameter has no flashing bit, it means that the parameter cannot be modified.
The possible reasons are as follows:
(1) The parameters are not modifiable, such as the actual detection state parameters, operation record
parameters, etc;
(2) This parameter can not be modified in the running state, and can be modified only after shutdown.
② Under the second level menu, you can modify the first level menu and modify the function code group
number.
For example, suppose you want to set the value of PC-00 while panel displays P4-00 , press the left key to move
the cursor to the "4" position for adjustment. The specific operations are as follows:
To Next Page
Loading...