Xinje VH6 Series - Group PC Auxiliary Function

144
Parameter
Name
Range
PB-50
Simple PLC operation time unit
0: second
1: hour
Parameter
Name
Range
PB-51
Simple PLC power-off memory
selection
Ones bit: power-off memory
0: not memory
1: memory
Tens bit: shutdown memory
0: not memory
1: memory
PLC power down memory refers to memorizing the operation stage and frequency of PLC before power down,
and continuing to run from the memory stage when next power on. If no memory is selected, the PLC process
will be restarted every time when the power is on.
PLC shutdown memory is to record the previous PLC operation stage and frequency during shutdown, and
continue to run from the memory stage during the next operation. If no memory is selected, the PLC process
will be restarted every time.
4-2-13. Group PC Auxiliary function
Parameter
Name
Range
PC-00
Jog frequency
0.00Hz~P0-13
PC-01
Jog acceleration time
0.0s~6500.0s
PC-02
Jog deceleration time
0.0s~6500.0s
Define the given frequency and acceleration and deceleration time of inverter when jogging.
During jog operation, the start mode is fixed as direct start mode (P4-00 = 0), and the stop mode is fixed as
deceleration stop mode (P4-22 = 0).