1. Before unpacking, please check whether the outer package of the product is in good condition, and whether
there is damage, moisture, deformation, etc.
2. Before unpacking, please check whether the external model identification of the packing box is consistent with
that of the ordered model.
3. When unpacking, please check the surface of products and accessories for damage, corrosion, bruise, etc.
4. After unpacking, please check whether the product name plate label is consistent with the external model label.
5. After unpacking, check whether the internal accessories are complete, including operation panel and expansion
card.
Note: If any of the above five points appear during unpacking, please contact the local Xinje office or Xinje dealer
in time, and we will solve the problem for you as soon as possible.
1. When carrying, please hold the bottom of the machine.
If you only hold the panel, there is a risk that the main body will fall and hurt your feet.
2. Please install it on the plate of metal and other non combustible materials.
If it is installed on flammable materials, there is a risk of fire.
3. When more than two inverters are installed in the same control cabinet, please set the cooling fan and keep the
air temperature at the air inlet below 40 ℃.
Due to overheating, it can cause fire and other accidents.
To Next Page
Loading...
Need help?
General