42
.
Setting Sensitivity
ISO value affects the camera’s sensitivity to light. The default ISO setting is
"Auto", but you can also adjust the setting manually. Use low ISO value in
bright condition, and high ISO value when light is insufficient.
Chapter 2: Taking Pictures and Recording Video Clips
1
In the capture menu, select "ISO" and then
press on the four-way key.
2
Select "Auto", "200", or "400".
3
Press "OK" to confirm the setting.
Note 1: High ISO value may lead to noise in the
picture.
Note 2: ISO speed resets to default "Auto" after
you turn off the camera.
To Next Page
Loading...