IMPORTANT
This manual was produced by the Yamaha Motor Powered Products Co., Ltd. primarily for use by
Yamaha dealers and their qualified mechanics. It is not possible to include all the knowledge of a
mechanic in one manual. Therefore, anyone who uses this book to perform maintenance and
repairs on Yamaha machines should have a basic understanding of mechanics and the techniques
to repair these types of machines. Repair and maintenance work attempted by anyone without this
knowledge is likely to render the machine unsafe and unfit for use.
This model has been designed and manufactured to perform within certain specifications in regard
to performance and emissions. Proper service with the correct tools is necessary to ensure that the
machine will operate as designed. If there is any question about a service procedure, it is imperative
that you contact a Yamaha dealer for any service information changes that apply to this model. This
policy is intended to provide the customer with the most satisfaction from his machine and to con-
form to federal environmental quality objectives.
Yamaha Motor Powered Products Co., Ltd. is continually striving to improve all of its models. Modifi-
cations and significant changes in specifications or procedures will be forwarded to all authorized
Yamaha dealers and will appear in future editions of this manual where applicable.
• This Service Manual contains information regarding periodic maintenance to the emission control
system. Please read this material carefully.
• Designs and specifications are subject to change without notice.
IMPORTANT MANUAL INFORMATION
Particularly important information is distinguished in this manual by the following notations.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
A WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
A NOTICE indicates special precautions that must be taken to avoid damage to the machine
or other property.
TIP
A TIP provides key information to make procedures easier or clearer.
WARNING
To Next Page
Loading...
