Yamaha MX250 - Adjusting the Governor

3-20
1
2
3
4
5
6
7
8
9
10
ENGINE
GOVERNOR
4.
Adjust:
• Governor
(Refer to “ADJUSTING THE GOVERNOR” on page
3-20)
ADJUSTING THE GOVERNOR
1.
Adjust:
• Governor
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Adjustment steps:
a. Loosen the governor arm bolt “1”.
b. Turn the governor arm “2” clockwise until it stops.
c. Turn the governor fork “3” clockwise until it stops.
d. Tighten the governor arm bolt “1”.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
1
2
3
Governor arm bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
T
R
.
.