PSR-A2000 Owner’s Manual 149
Songs – Recording Your Performances and Creating Songs –
3
3 While holding the SONG [REC] button, press the desired track button.
4 Press the SONG [>/
❙
❙
] (PLAY/PAUSE) button to start Punch In/Out recording.
Play the keyboard at the Punch In point and stop recording at the Punch Out point.
5 Press the [I] (SAVE) button to execute the Save operation.
NOTICE
The recorded Song data will be lost if you select another Song or turn the power to the instrument off without executing the Save opera-
tion.
■ Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function. The illustrations below
indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
[7 ▲▼]/
[8 ▲▼]
PEDAL PUNCH
IN/OUT
When this is set to ON, you can use Foot Pedal 2 to control the Punch In
and Punch Out points. While a Song is playing back, pressing (and hold-
ing) Foot Pedal 2 instantly enables Punch In recording, while releasing
the pedal stops recording (Punch Out). You can press and release Foot
Pedal 2 as often as you want during playback to punch in/out of overwrite
recording. Note that the current function assignment of the Foot Pedal 2
is cancelled when the Pedal Punch In/Out function is set to ON.
NOTE Pedal Punch In/Out operation may be reversed depending on the particular pedal you’ve connected
to the instrument. If necessary, change the pedal polarity to reverse the control (page 176).
12345678
12345
12345678
12345678
12345
12345678
12345678
12345
12345678
68
12345 7
REC START setting
REC END setting
NORMAL
REPLACE ALL
NORMAL
PUNCH OUT
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
Original data
Start overwrite
recording *1
Start overwrite
recording *1
Start overwrite
recording *1
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play back
original data
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Start overwrite recording
Start overwrite recording
Start overwrite recording
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/
play original data
Deleted
Deleted
*1 To avoid overwriting measures 1–2,
start recording from measure 3.
*2 To stop recording, press the [REC]
button at the end of measure 5.
Previously recorded data
Newly recorded data
Deleted data
Deleted
To Next Page
Loading...
Need help?
General
