Mixing Console – Editing the Volume and Tonal Balance –
8
86 PSR-A2000 Owner’s Manual
1 Same operation as in the “Basic Procedure” on page 83. In step
2, select VOL/VOICE tab.
2 Press the [D] (or [I]) button to select the PANPOT parameter or
press the [E] (or [J]) button to select the VOLUME parameter.
3 Use the [1 ▲▼] – [8 ▲▼] buttons to adjust panning/volume for
the desired part.
4 Save your settings (step 5 on page 84).
Adjusting Panning/Volume for each part
3
2
PANPOT
VOLUME
To Next Page
