En 133
SETUP
Confirming information of this unit (Information menu)
■
Network information
Displays information on the network status. Refer to “Adjusting
this unit’s network parameters” (☞
p. 125) for details on setting the
network status.
■
System information
Displays information on the current settings of the advanced setup.
■
Zone information
Displays information on the currently selected input and the
volume of Zone2, Zone3 or Zone4.
IP Address /
Subnet Mask /
Default Gateway
Displays the status of the current IP address assigned
to this unit.
DNS Server (P) /
DNS Server (S)
Displays the IP address of the primary and secondary
DNS (Domain Name System) servers.
MAC Address Displays the MAC address filter set to this unit.
Status Displays the network status of this unit.
Remote ID Displays the Remote ID set to this unit.
TV Format Displays the TV format set to this unit.
Speaker Impedance Displays the speaker impedance set to this unit.
System ID Displays the system ID of this unit.
Firmware Version Displays the current version of the firmware installed
to this unit.
When detecting the latest firmware over a network:
– exclamation point appears on the Information menu icon
– message indicating that the latest firmware is released appears
in the System information
In this case, update the latest firmware by using “NETWORK”
of “FIRM UPDATE” in Advanced Setup menu.
To Next Page
Loading...
Need help?
General