PLAYBACK
En 54
This unit has a SCENE function that allows you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, Tone Control, Adaptive
DRC, and Compressed Music Enhancer with one key.
Selecting the SCENE suitable for the external component
At initial factory settings, SCENE functions are configured for the following components. Select a
scene according to the component that you want to play back.
SCENE 1
Settings are configured for viewing DVD or Blu-ray Disc content. Press this key and play back content
from the DVD or Blu-ray Disc player connected to the AV1 jack on this unit.
SCENE 2
The settings are configured for viewing a TV content. Press this key and turn on the TV connected to
the AUDIO1 jack on this unit.
SCENE 3
The settings are configured for listening to CD content. Press this key and play back the CD player
connected to the AUDIO2 jack on this unit.
SCENE 4
Settings are configured for listening to a radio station. Press this key and tune into a radio station.
SCENE 5-12
The nothing is registered on the scenes at initial factory setting. The favorite settings can be registered on the
scenes and reloaded by using “Save” and “Load” in Scene menu. For details, refer to “Scene menu”
(☞
p. 107).
Four scenes are available for different uses, such as playing movies or music. The following settings such as input sources, sound programs, and HDMI Output are provided at initial factory settings.
Settings that are not checked ( ) are not enabled when a scene key is pressed. Use “Load” in the Scene menu to check settings to be enabled. Refer to “Adjusting settings registered with the SCENE function”
(☞
p. 107) for details.
Changing input settings with a single key (SCENE function)
2
3
SCENE
1
4
BD/DVD TV CD RADIO
• When switching scenes, also change the external component that the remote control operates (☞p. 134).
• We recommend that selecting a scene and editing the SCENE function are performed in the Scene menu
(☞
p. 106).
• This unit has eight additional scene functions. After selecting one of these scenes, one of the additional
eight scenes may also be selected (☞
p. 107).
• Press and hold
eSCENE key for about three seconds to register the current setting to the scene.
SCENE
Input
Audio
Select
HDMI
Output
Sound
Program
Pure Direct
Mode
Tone Control
Adaptive
DRC
Compressed
Music
Enhancer
CINEMA
DSP 3D
Mode
Dialogue
Lift
Extended
Surround
Video
Adjustment
Video
Processing
Master
Volume
Lipsync Delay
Setting
Pattern
PEQ
Select
1
(BD/DVD
Movie Viewing)
AV1 Auto OUT 1+2 Drama Auto Bass: 0.0 dB
Treble: 0.0 dB
On Off On 0 Auto Off Off -40.0 dB Auto 0 ms Pattern1 Natural
2
(TV Viewing)
AUDIO1 Auto OUT 1+2 STRAIGHT Auto Bass: 0.0 dB
Treble: 0.0 dB
On On On 0 Auto Off Off -40.0 dB Auto 0 ms Pattern1 Natural
3
(CD Music
Listening)
AUDIO2 Auto OUT 1+2 STRAIGHT Auto Bass: 0.0 dB
Treble: 0.0 dB
Off Off On 0 Auto Off Off -40.0 dB Auto 0 ms Pattern1 Natural
4
(Radio
Listening)
TUNER --- OUT 1+2 STRAIGHT Auto Bass: 0.0 dB
Treble: 0.0 dB
Off On On 0 Auto Off Off -40.0 dB Auto 0 ms Pattern1 Natural
✓ ✓ ✓ ✓
To Next Page
Loading...
Need help?
General