Yamaha RX-A3000 User Manual

En 53
PLAYBACK
Basic playback procedure
■ Adjusting high/low-frequency sound
(Tone control)
You can adjust the balance of the high-frequency range (Treble)
and low-frequency range (Bass) of sounds output from the front
left and right speakers to obtain desired tone.
1
Press TONE/BALANCE on the front panel repeatedly
to select “Treble” or “Bass.”
The current setting is displayed on the front panel display.
2
Press PROGRAM l / h to adjust the output level in
the following frequency range.
The display returns to the previous display soon after you release
the key.
The tone control of the speakers or headphones can be set
separately. Set the headphone tone control with the headphones
connected.
TONE/BALANCE
PROGRAM l / h
VOLUME
ToneControl

Treble+0.5dB
Adjustable range -6.0 dB to +6.0 dB
Adjustment
increments
0.5 dB
• The tone control settings are not effective when this unit is in the
Pure Direct Mode or “MULTI CH” is selected as an input source.
• If you set the balance extremely off, sounds may not match those
from other channels well.
• The tone control can also be adjusted in the Option menu
(☞
p. 64).

Yamaha RX-A3000 Specifications

General

Brand	Yamaha
Model	RX-A3000
Category	Receiver
Language	English