SETUP
Controlling the remote control to operate various functions
En 143
Simplified remote control
Use the supplied simplified remote control to make basic controls of this unit.
■
Setting the controlling zone of the simplified remote control
Use this feature to set the controlling zone (☞p. 154) and remote control ID (☞p. 145) of the
simplified remote control.
Setting the remote control ID
• ID1: Press and hold D (left cursor) and 1 for 3 seconds.
• ID2: Press and hold D (left cursor) and 2 for 3 seconds.
Setting the controlling zone
• Main zone: Press and hold E (right cursor) and 1 for 3 seconds.
• Zone2: Press and hold E (right cursor) and 2 for 3 seconds.
• Zone3: Press and hold E (right cursor) and 3 for 3 seconds.
■
Replacing the battery in the simplified remote control
Change the battery when the operation range of the simplified remote control decreases.
3214
SCENE
INPUT
ON SCREEN OPTION
MUTE
PRESET
VOLUME
ENTER
RETURN
DISPLAY
PRG SELECT
SCENE
Switch the input source and
the sound program with a
single button (☞p. 54).
PRESET
Selects a preset station
(☞p. 68, p. 77).
INPUT l / h
Select the input source
(☞p. 52). J1
VOLUME +/-
Adjust the volume level
(☞p. 52).
MUTE
Mutes the audio output
(☞p. 52).
Input source operation
keys
Operate song playback,
stop, and skip functions for
USB or DOCK, or select an
audio program for HD
Radio.
SLEEP
Switches this unit to
standby mode automatically
after a specified period of
time has elapsed (sleep
timer) (☞p. 13).
These buttons function as
well as the following identical
buttons on the main remote
control.
h ON SCREEN
i Cursor B / C / D / E
i ENTER
i RETURN
p OPTION
r DISPLAY
A (Power)
Turns on or off this unit.
Remove the insulation sheet
before using the remote control.
NOTES
• Insert the battery according to the polarity markings (+ and -).
• If the batteries run out, immediately remove them from the simplified remote control to prevent an
explosion or acid leak.
• If a battery starts leaking, dispose of it immediately. Be careful not to let the leaking battery acid touch
your skin or clothing.
• Before inserting new batteries, wipe the compartment clean.
• Dispose of batteries according to your regional regulations.
Use a straight
pin to remove
the cover.
Replace the
battery with a
new CR2025
battery.
Close the cover.
J
1 : To select the detailed input for USB or NET (PC, NET RADIO, Rhapsody, or SIRIUS IR), use PRESET or SCENE function
to select the desired one.
To Next Page
Loading...
Need help?
General