YASKAWA CACR-JU series User Manual

7 Wiring
7.2.3 DC-bus
7-26
7.2.3 DC-bus
A bus bar built into the Σ-V-SD driver connects the power regeneration converter and a SERVOPACK or two
SERVOPACKs.
The bus bar connection procedure is given below.
1. Remove the barriers between the devices to connect.
2. Rotate the bus bar of the device on the right 180° clockwise, and then hook it on the terminals
of the device on the left.
Barrier of SERVOPACK
Barrier of power regeneration converter

YASKAWA CACR-JU series Specifications

General

Brand	YASKAWA
Model	CACR-JU series
Category	Servo Drives
Language	English