1.1 Section Safety
CAUTION
Do not carry the drive by the front cover.
Failure to comply may cause the main
body of the drive to fall, resulting in minor or moderate
injury.
NOTICE
Observe proper electrostatic discharge procedures (ESD) when handling the drive and
circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
A motor connected to a PWM drive
may operate at a higher temperature than a utility-
fed motor and the operating speed range may reduce motor cooling capacity.
Ensure that the motor is suitable for inverter duty and/or the motor service factor is adequate
to accommodate the additional heating with the intended operating conditions.
1.1 Section Safety
20
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual
2/6/2008-14:44