Start-Up
Programming &
Operation
This chapter explains the functions of the LED operator and how
to program the drive for initial operation.
4.1 SECTION SAFETY.............................................70
4.2 USING THE DIGITAL LED OPERATOR..............73
4.3 THE DRIVE AND PROGRAMMING MODES.......78
4.4 START-UP FLOWCHARTS................................86
4.5 BASIC OPERATION..........................................87
4.6 POWERING UP THE DRIVE.............................111
4.7 NO-LOAD OPERATION TEST RUN..................113
4.8 TEST RUN WITH LOAD CONNECTED.............115
4.9 VERIFYING AND BACKING UP PARAMETER
SETTINGS.......................................................116
4
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000
Installation & Start-Up Manual
69
2/6/2008-14:44
To Next Page
Loading...
