Electrical
Installation
This chapter explains proper procedures for wiring the control
circuit terminals, motor and power supply.
3.1 SECTION SAFETY.............................................40
3.2 STANDARD CONNECTION DIAGRAM...............43
3.3 MAIN CIRCUIT CONNECTION DIAGRAM..........46
3.4 TERMINAL BLOCK CONFIGURATION..............47
3.5 PROTECTIVE COVERS.....................................48
3.6 MAIN CIRCUIT WIRING.....................................50
3.7 CONTROL CIRCUIT WIRING.............................54
3.8 I/O CONNECTIONS...........................................60
3.9 MAIN FREQUENCY REFERENCE......................63
3.10 BRAKING RESISTOR........................................65
3.11 INTERLOCKING WITH CONNECTED
MACHINERY.....................................................67
3
YASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000
Installation & Start-Up Manual
39
2/6/2008-14:44
To Next Page
Loading...
