xxix
Operation Precautions
Before starting operation with a machine connected, change the
settings of the switches and parameters to match the machine.
Unexpected machine operation, failure, or personal injury may occur
if operation is started before appropriate settings are made.
Do not radically change the settings of the parameters.
There is a risk of unstable operation, machine damage, or injury.
Install limit switches or stoppers at the ends of the moving parts
of the machine to prevent unexpected accidents.
There is a risk of machine damage or injury.
For trial operation, securely mount the Servomotor and discon-
nect it from the machine.
There is a risk of injury.
Forcing the motor to stop for overtravel is disabled when the Jog,
Origin Search, or Easy FFT utility function is executed. Take nec-
essary precautions.
There is a risk of machine damage or injury.
When an alarm occurs, the Servomotor will coast to a stop or
stop with the dynamic brake according to the SERVOPACK
Option and settings. The coasting distance will change with the
moment of inertia of the load and the resistance of the External
Dynamic Brake Resistor. Check the coasting distance during trial
operation and implement suitable safety measures on the
machine.
Do not enter the machine’s range of motion during operation.
There is a risk of injury.
Do not touch the moving parts of the Servomotor or machine
during operation.
There is a risk of injury.
To Next Page
Loading...
Need help?
General
