YASKAWA GA800 Series - Sub-Chart A-1: Induction Motor Auto-Tuning and Test Run Procedure

Startup Procedure and Test Run
4
4.4 Start-up Procedures
YASKAWA SIEPC71061737B GA800 Drive Technical Reference 145
◆ Sub-Chart A-1: Induction Motor Auto-Tuning and Test Run Procedure
Figure 4.9 Induction Motor Auto-Tuning and Test Run Procedure
*1 Be sure to release the holding brake before doing Inertia Tuning.
*2 In ASR Tuning, the drive will automatically tune Feed Forward control and KEB Ride-Thru 2 parameters.