YASKAWA GA800 Series - Save a Backup of Parameters

4.6 Keypad Operation
166 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
◆ Save a Backup of Parameters
You can save a backup of the drive parameters to the keypad. The keypad can store parameter setting values for a
maximum of four drives in different storage areas. Parameter setting backups can save time when you set parameters
after you replace a drive. If you set up more than one drive, you can copy the parameter settings from a drive that
completed a test run to the other drives.
Note:
• Stop the motor before you back up parameters.
• While you back up parameters, the drive will not accept Run commands.
• The DriveWorksEZ PC software password is necessary to back up qx-xx [DriveWorksEZ Parameters] and rx-xx [DWEZ Connection
Parameters]. If you enter an incorrect password, the drive detects PWEr [DWEZ Password Missmatch].
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2. Push (Menu).
3. Push or to select [Parameter Backup/Restore], then push .
4. Push or to select the items to back up, then push .
5. Push or to select [Backup (drive → keypad)], then push .