4.6 Keypad Operation
170 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
3. Push or to select [Parameter Backup/Restore], then push .
4. Push or to select the item to delete, then push .
5. Push or to select [Erase (backup data of keypad)], then push .
6. Push or to select the data to delete, then push .
The keypad will show the “End” message when the write process is complete.
◆ Check Modified Parameters
This procedure will show all parameters that are not at their default values. You can also use this procedure to quickly
access and edit changed parameters and is very useful when you replace a drive. When all parameters are at their
default values, the keypad will show “0 Parameters”.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
To Next Page
Loading...
