8.4 Replace Cooling Fans and Circulation Fans
382 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
2. Align the notches on the fan with the pins on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pins on drive
C - Front of drive
Figure 8.4 Install the Cooling Fans
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
3. Put the cable in the recess of the drive.
A - Front of drive
Figure 8.5 Put the Cable in the Drive Recess
4. Insert the fan finger guard straight until the hook clicks into place.
Figure 8.6 Reattach the Fan Finger Guard
5. Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
To Next Page
Loading...
